20 years focusing on recycling
The Pipe and Profile Granulator /Crusher of the PNPC series are available in rotor widths of up to 1400mm and diameters ranging from 560 to 700 mm.The completely welded heavy steel cutting chamber is angled and fitted with an extended hopper to allow easy feeding of parts.The standard V-cut creates a high quality regrind with a very low percentage of fines in the output material.
PE Pipe Crusher Machine Description:
As we all know that, PE pipe is one kinds of the white plastic pipes. We normally use the PE pipe for plumbing and drainage. The PE pipe crusher is the size reduction machine available to shred the PE pipe for recycling purpose. Because this crusher can crush the PE pipes into small pieces or even granulates.
The PE Pipe and Profile Granulator /Crusher of the PNPC series are available in rotor widths of up to 1400mm and diameters ranging from 560 to 700 mm. The completely welded heavy steel cutting chamber is angled and fitted with an extended hopper to allow easy feeding of parts. The standard V-cut creates a high quality regrind with a very low percentage of fines in the output material. Other standard features include a hydraulically opened hopper for outboard bearings reducing the risk of contamination.
PE Pipe Crusher Machine Applications:
Conventional granulators/crushers have substantial problems handling long pipes and profiles. To feed large and bulky parts in most cases cavities or platforms are needed. Therefore Wanrooe developed the PNPC model. Thanks to the almost level feeding hopper, long pieces can be fed easily. While the machine is operating there is no risk of blocking, in case of congestion no more material will be accepted by the machine until the grinding chamber is empty and the machine will accept material again, and work continues.
PE Pipe Crusher Machine Advantages:
Knives are adjusted outside of the machine
Specially developed deflector wedge
Wide choice of rotors
Well thought out housing design
Strong Welded Steel construction
Oversized outboard bearings
How to use the PE pipe crusher?
The PE pipe crushing machine has several types such as single shaft shredder, double shaft shredder and granulator. These types all have no problem to crush the PE pipes. The single shaft machine is equipped with screen, so you can control the size of the PE pipes after crushing by the size of the screen. The speed of the double shaft shredder is the slowest among them because it crush the PE pipe by the occlude of blades. The operation speed of the granulator normally is very high and also it can make the PE pipes into much smaller particles.
The operation of these types of PE pipe crusher is very easy. You just need to press buttons to control the machine. There are start button, stop button, emergency stop switch listing on the control panel, you can press the buttons to control the PE pipe crusher as you need.
Model | PNPC160 | PNPC200 | PNPC210 | PNPC300 | PNPC320 | PNPC380 | PNPC400 | PNPC630 |
Rotational knife diameter mm | 160 | 200 | 210 | 300 | 320 | 380 | 400 | 630 |
Rotational knife quantity | 8 | 3 | 3 | 3 | 3 pcs /2 groups | 3 pcs /4 groups | 5 | 9 pcs/2 groups |
Rotational knife speed (r/min) | 500 | 870 | 500 | 640 | 650 | 650 | 500 | 480 |
Fixed knife quantity | 2 | 2 | 2 | 3 | 2 | 6 pcs /2 groups | 2 | 4 pcs /2 groups |
Screen plate aperture (mm) | φ 8,φ 10, φ 12,φ 14,etc, can be tailor-made | |||||||
Smash capacity (kg/h) | 100-200 | 50-110 | 80-120 | 50-250 | 250-350 | 300-500 | 350-450 | 700-850 |
Power (kw) | 5.5 | 4 | 4 | 18.5 | 22 | 27.5 | 15 | 44 |
Feeding mouth dim (mm) | 350 × 110 | 240 × 350 | 250 × 230 | 360 × 500 | 400 × 600 | 450 × 800 | 375 × 320 | 820 × 610 |
Machine weight (kg) | 450 | 300 | 320 | 800 | 1400 | 1800 | 1200 | 4200 |
Appearance size (mm) | 1220X500 × 1200 | 1000 × 590 × 1090 | 800 × 600 × 1400 | 1550 × 1300 × 1850 | 1613 × 1150 × 1910 | 1800 × 1460 × 1880 | 2500 × 1200 × 2000 | 2754 × 2000 × 2850 |