20 years focusing on recycling
N95 Medical mask machine the servo and constant temperature control system adopted is controlled by PL program to make the material from compounding → forming → welding → punching → spot welding ear straps at one time, and the entire production process is fully automated.
Description:
N95 Medical mask machine the servo and constant temperature control system adopted is controlled by PL program to make the material from compounding → forming → welding → punching → spot welding ear straps at one time, and the entire production process is fully automated. Mask machine product features The mask machine is a multi-layer non-woven fabric formed by hot-press folding, ultrasonic welding, scrap removal, ear strap bridge welding, and other processes to produce a variety of masks with fixed filtration performance. The production speed of its masks reaches 120 pieces/minute and above, and the pass rate is above 98%, which can more than double the production efficiency of similar products.
Basic configuration:
1. Supply of outer layer non-woven fabric, roll diameter≤1000mm:
1) Mechanical tension material rack, tension spring control;
2) Automatic shutdown alarm when material is cut off.
2. Meltblown cloth supply, roll diameter ≤1000mm:
1) Mechanical tension material rack, tension spring control;
2) Automatic shutdown alarm when the material is cut off and the joints are automatically rejected.
3. Inner layer non-woven fabric supply, roll diameter≤1000mm:
1) Mechanical tension material rack, tension spring control;
2) Automatic shutdown alarm when material is cut off.
4. Nose bridge supply, roll diameter ≤500mm:
1) Mechanical tension material rack, tension spring control;
2) Nose bridge feeding and cutting device, servo control;
Product Name | Automatic folding medical protective mask (N95) production line |
Product structure | left and right elastic ear straps + outer nonwoven fabric + nose bridge + meltblown fabric + inner nonwoven fabric |
Design speed | 120 pieces / minute |
Production speed | 100 pieces / minute |
Power supply: | 220V 50HZ |
Installed capacity | about 10KW (including air compressor power) |
Compressed air | 0.6 ~ 0.8Mpa, 1.0 cubic meter / minute |
Defective rate | ≤1% (excluding defective products caused by glue spraying machine and material joints) |
Starting rate | ≥85% |
Equipment size(L*W*H) | 7500*1400*2000mm |
Weight | 1500kg |