Blockage Problem of Plastic Crushing Machine
The reasons for blockage of the feed port during the use of plastic crushers are generally as follows. Let’s now see how to solve the blockage problem.
1. Discharge Pipe Blockage
Causes: The discharge pipe may be blocked or clogged, which will cause the outlet of the plastic crusher to be blocked. Improper matching of conveying equipment can also cause the discharge pipe to become blocked after the airflow is weakened or there is no airflow.
Solution: Clear the feed port, replace the mismatched conveying equipment, adjust the feed rate, and make the equipment run normally.
2. Blade and Screen Issues
Causes: Blades becoming disconnected or aging, screen holes becoming closed or broken, or the crushed material having too high water content can cause the plastic crusher to become blocked.
Solution: Broken and severely aging blades should be replaced regularly. The screen should be checked regularly, and the water content of the crushed material should be less than 14%.
3. Structural Design Mismatch
Causes: The plastic crusher is not suitable for the plastic in terms of structural design.
Solution: When purchasing a plastic crusher, it is best to be able to test the materials that need to be crushed.
4. Excessive Feed Speed
Causes: The feed speed may be too fast, increasing the load and resulting in blockage.
Solution: The current of the plastic crusher should generally be controlled at about 85% of the rated current.
Features of Plastic Crusher
The plastic crusher is easy to operate, and even beginners can quickly get started. Blade replacement is simple and quick, reducing equipment downtime.
The wide flat blade structure is designed specifically for crushing large-volume, thin-walled, and thin-material plastic products, greatly improving crushing efficiency.
It is equipped with electronic control safety design. The double-layer structure of the hopper contains sound insulation materials to reduce noise. The motor has an overload protection device to prevent damage.
The power equipment is energy-saving and durable, balancing economic benefits and environmental protection needs.
Plastic Crusher Applications
Plastic crushers are suitable for recycling plastics such as boxes, thin pipes, blow molding parts, bottles, and shells.
They are used in plastic factories, electronics factories, plastic container factories, lighting factories, shoe factories, electrical factories, auto parts factories, bag factories, granule factories, waste recycling factories, plastic furniture factories, and plastic cabinet factories.
They are suitable for crushing ABS, PMMA, POM, nylon, hard plastic scrap materials, horns, fiber materials, and other hard plastics.
Get a Professional Answer for Your Needs
To better provide you with a professional solution, please describe your parameters or technical requirements (such as processing materials, output size, capacity, etc.) when sending an inquiry. We will reply to you as soon as possible.
