Used Plastic Agglomerator Machine
The plastic agglomerator machine can immediately granulate waste thermoplastic film and products with wall thickness less than 2 mm.
It can agglomerate waste or thin film made of soft polyvinyl chloride (PVC), high and low-density polyethylene (HDPE/LDPE), polypropylene (PP), polystyrene (PS), other thermoplastic plastics, as well as foam polystyrene waste products for granulation.
Working Principle
Waste material is fed into the machine pot body. The material is quickly cut by the high-speed rotating turning blade and the fixed blade shearing action. The material then moves along the pot body wall due to the centrifugal force of the knife disc.
At the same time, the material turns up and down by the paddle and moves from all sides toward the center of the pot body. The friction of the material itself and the friction against the pot wall and blades generate significant frictional heat under high speed, causing the material temperature to rise to a semi-plastic condition and form small lumps.
Before the materials block, a pre-determined amount of water is sprayed onto the material. The cold water contacts the hot materials, gasifies, and quickly removes surface heat, causing the material surface to cool rapidly and avoid blocking.
Then, through the crushing action between the rotary blade and fixed blade, the material is cut into particles (irregular size materials). During crushing, appropriate color pigments may also be added as needed.
Used Plastic Agglomerator Machine Video
General Features
1. The PP/PE plastic agglomerator is used for the fast recycling of waste films and woven bags.
2. The machine can quickly granulate used thermoplastic film or thermoplastic products with thickness less than 2 mm.
3. It is applicable to the agglomerating of soft PVC, HD/LD polyethylene, PP, PS, and other used thermoplastic products or film.
4. The granules produced by the plastic agglomerator can be supplied to a pelletizing machine for further granulation or fed directly to an extruder or injection molding machine.
5. It increases the bulk density of LDPE, HDPE, PP, BOPP, and PET film and bag flakes.
Special Features
— Robust design with double bearings for holding the main shaft
— High-performance blades
— Temperature control
— Automatic water flushing
— Motor power range: 18.5 kW to 132 kW
— Processing capacity range: 50 kg/h to 500 kg/h
Application Areas
Our plastic agglomerator machine is used to agglomerate plastic scrap such as wet or dry recycled plastic films, PET fiber, woven bags, soft PVC, LDPE, HDPE, PS, PP, foam PS, PET fibers, and other thermoplastics.
Get a Professional Answer for Your Needs
To better provide you with a professional solution, please describe your parameters or technical requirements (such as processing materials, output size, capacity, etc.) when sending an inquiry. We will reply to you as soon as possible.
