What is laminated paper cup?
Laminated paper cup is a common paper beverage cup with an inner layer coating, usually made of polyethylene (PE) or polypropylene (PP). This coating is called lamination, and its purpose is to prevent beverages from seeping through the paper cup, maintaining the structural stability and water resistance of the cup.
Why recycle laminated paper cups?
There are several reasons to recycle laminated paper cups:
Environmental protection: Laminated paper cups are typically not accepted by regular paper recycling machines because the coating can interfere with the paper recycling process. If laminated paper cups are discarded at will, they may become part of a landfill or pollute the environment. Therefore, recycling laminated paper cups helps to reduce the amount of waste and protect the environment.
Resource utilization: The paper in laminated paper cups can be processed through specialized recycling processes to convert it into recycled paper. Recycling laminated paper cups can save resources, reduce deforestation, and conserve energy.
Circular economy: Recycling laminated paper cups is part of the circular economy. By recycling and reusing waste materials, we can reduce the demand for raw materials and reduce waste generation.
In conclusion, recycling laminated paper cups is an environmentally friendly behavior that helps to reduce the amount of waste, protect the environment, and promote the sustainable use of resources.
Why do we need to separate paper from plastic?
Paper and plastic recycling separators can separate the pulp and plastic in the material to form a single material structure. The separated plastic is processed into plastic particles through the plastic washing machine and the two-stage plastic pelletizer/granulator, which facilitates transportation and achieves better utilization value; Paper pulp can be pressed into pulp boards, which greatly improves economic benefits, achieves the rational use of renewable resources, reduces the burden of solid waste disposal, and continuously provides kinetic energy for creating a green ecological environment!
Paper And Plastic Recycling Separator Flow:
Our Paper and plastic recycling separator is determined according to the material, output and customer’s demand for final discharge. Our company has specialized in the research and production of paper and plastic recycling equipment for 20 years and has enough experience to customize the scheme for you.
Paper and plastic separator
The horizontal paper and plastic separator machine is a specialized equipment used to separate plastic and other non-pulp impurities from laminated paper. It is highly effective and mainly used in the separation and recycling of laminated waste paper and the separation of fibers and plastics from pulp screening. The separated fibers can be used for papermaking, while the plastic can be granulated and recycled. With its simple structure and thorough separation of paper and plastic, the machine is an ideal solution for waste recycling.
Application:
The paper and plastic separator is suitable for recycling aluminum foil paper, cola paper, Tetra Pak packaging, milk packaging, laminated paper, cup paper, leather paper, kraft paper, paper mill scraps and other materials.
Feature:
No heating or chemical solution is required, direct separation, water can be recycled, improving utilization value.
The separation effect is good, and the separated pulp and plastic are very clean.
Plastic can be granulated and paper can be turned into pulp, both of which can realize new value.
Suitable for separation and recycling of various types of paper-plastic composites.
Separation and recycling does not require the addition of any chemical raw materials or heating, saving time and effort, safe and efficient, and complete separation.
Water recycling, no waste water or waste is produced, and no pollution is caused to the environment.
The purity of plastic can reach about 99%, the purity of paper velvet can reach about 99.5%, and the raw material recovery rate is over 99.9%.
Parameter:
| Model | 500 | 600 | 700 | 800 |
| Output£¨T/H£© | 1-2 | 2-3 | 4-5 | 5-8 |
| Input pulp concentration£¨%£© | Can be used wet or dry | |||
| Slag discharge concentration (%) | 15-20% | |||
| mesh | 6-8 | 6-10 | 6-10 | 6-14 |
| Flush water pressure£¨Mpa£© | 0.2 | |||
| Rinse water volume£¨m3/H£© | 30-40 | 40-50 | 50-60 | 60-80 |
| Equipped with motor£¨KW£© | 45-55 | 55-90 | 75-110 | 110-180 |
Pulp Separator
Pulp Separator is mainly used as an ideal equipment for tail pulp treatment in waste paper pulping systems, and plays a major role in the separation of impurities such as pulp and plastics. This machine has the characteristics of closed operation, no splashing, high fiber retention rate, low processing cost and quick investment recovery.
In waste paper pulping, due to the different paper quality, there is a lot of residue. This machine can remove light and heavy debris and decompose small pieces of paper in the fiber. It will not block the screen plate, and hard debris will not damage it. Screen plate, the factory does not need to stop operation frequently for cleaning, and it can also be used as a second bulk machine. It is mainly used for sorting tail pulp after fiber separator and pressure screen; the processed and sorted pulp is directly returned to the pulp tank in front of fiber separator or pressure screen for reuse. The tailings discharged after sorting do not contain fiber and comply with environmental emission requirements. It has been used with remarkable results in many paper mills.
Parameter:
| Model | 280 | 380 | 450 | 510 | 610 |
| Output£¨T/D£© | 15-25 | 25-50 |
Product Deep DiveFrequently Asked QuestionsFactory Visit for Recycling Equipment BuyerQ1: Do you accept factory tours? A: Please contact us one week in advance to Recycling Equipment Warranty PeriodQ1: What is the warranty period for the complete machine? A: 12 months The standard Recycling Equipment Installation: What to ExpectQ1: What preparations are needed for equipment installation? A: Construction drawings, associated electrical installations Ensure Recycling Equipment Lead Time: Order to ShipmentQ1: What information is needed to obtain a quote? A: Typically, 45–60 days After order Recycling Equipment Quote: Info You Need to ProvideQ1: What information is needed to obtain a quote? A: Material to be processed, material Custom Recycling Equipment Lead TimeQ1: What is the service life of the equipment? A: Average service life 10–15 years |
