PVC Mixer Machine Function Role Use Method

PVC mixer machine use: used for mixing, stirring, coloring and other processes of materials in plastic, rubber, daily chemical industry, is special equipment for the production of plastic plates, pipes, profiles and degraded plastics. Mainly for different viscosity powdered liquid raw materials for shearing, dispersion, emulsification, mixing, through the slurry leaves on the three pieces of high-speed operation for mixing and stirring, high-speed strong shear, impact, crushing, dispersion of materials to achieve rapid mixing, dissolution, dispersion, performance volatilization of the function. Is plastic, building materials

PVC mixer machine material and working principle description  
The material of the pot body is made of 6mm stainless steel plate, the inner surface is extremely smooth and hard, with the characteristics of wear resistance, corrosion resistance, high-temperature resistance and not easy to stain materials. The material of pot lid is ZL102 cast aluminum, the inner surface is finely turned and polished, not easy to stain the material, and the quality is easy to open the pot lid.

PVC Mixer Machine Video:

The device adopts an 8mm stainless steel pot bottom and polished stainless steel stirring blades, which are wear-resistant and corrosion-resistant. During hot mixing, the pot cover is pneumatically opened, and the main shaft is equipped with three sets of deep groove ball bearings. Multiple specifications of skeleton type double lip oil seals, tilting discs, gas seals, and other composite sealing methods are used to ensure that materials do not penetrate the shaft seal. The equipment adopts belt deceleration, which is both reliable and overload resistant. The overall design is efficient and durable, suitable for various industrial mixed applications.

PVC high-speed mixing machine hot mixing pot cover sealing method using two silicone rubber sealing tape sealing, reliable sealing, high-temperature resistance, no deformation. The equipment is advanced, easy to operate, safe and reliable. Small volume, lightweight, high efficiency, low energy consumption, low noise, is your ideal product to buy. With a high degree of automation, fast mixing speed, can be controlled by frequency conversion, its paddle for precision stainless steel pressure casting, and through the static and dynamic balance test. Especially the cooling machine paddle adopts foreign advanced spiral stirring structure, the whole container has no dead angle, with fast cooling speed, clean discharge, mixing effect has reached the advanced level abroad.　Stirring pulp, driven by the motor through the belt, the motor is AC two-speed motor, just press the low and high speed button, you can achieve low and high speed. But must pay attention to: want to run at high speed, should make the motor first low-speed start, then high-speed operation spindle by the bearing to bear the operation. The upper part of the main shaft has three stirring pulp, they rotate clockwise, so that the material on the one hand along the wall of the pot movement, and at the same time up and down cycle flip plus the role of the inflow plate, so that the mixing effect is better.

In order to better provide you with a professional answer, when sending an inquiry, please describe your parameters or technical requirements (such as processing materials, output size, capacity, etc.), we will reply to you as soon as possible!