High-speed mixer commonly used loading and unloading method

High-speed mixer consists of pot body, pot cover, transmission parts, base, discharge port and other components. It can easily realize the auxiliary requirements of heating, cooling, explosion-proof, liquid spraying atomization, etc. It is the ideal equipment for laboratory as well as production use. The barrel body is made of high-quality stainless steel, the inner wall is polished by fine polishing, not easy to stain, will not have a chemical reaction with the material, safe and reliable. The inner wall is also equipped with a guide plate, used to enhance the mixing effect, the barrel is equipped with a temperature thermocouple, the material temperature can be intuitively reflected in the electric box on the temperature control table, while the temperature control table is also used to reach the specified temperature for automatic discharge.

High-speed mixer in the plastics chemical industry is already mature and popular equipment, but there are still friends of its part of the use of methods are not very well understood, here wanrooe machinery to explain to you, today's high-speed mixer most commonly used several feeding and discharging methods.

First, plastic mixer feeding method

1.1, manual to pour material: this method is used for small and medium-sized equipment, more than 200L blender is not recommended for such use of a high degree of equipment inconvenience, the second is a one-time feeding amount of more, for individual production operators may be more strenuous.

1.2, feeder feeding: a more common way of feeding high-speed mixer, the operator will be unpacked and poured into the screw feeder, the material from the small hopper into the direct transport to the mixer barrel, this method is not limited to the height of the equipment, fast conveying speed, the price of the feeder is also more affordable.

1.3, negative pressure conveying material: negative pressure conveying is also called vacuum powder feeding machine, generally equipped in the mixer unit, for the whole set of equipment, its conveying will not have powder flying, can effectively control the production environment.

Second, the mixing machine discharge mode

2.1, feeder buried: the most standard method of discharging arrangement, open a pit in the place of the discharging mouth, the screw conveyor pre-buried in, mixing the finished powder directly by the conveyor to the storage bin.

2.2, mixer heightening: can avoid opening holes, need to communicate with the manufacturer in advance, the high-speed mixer heightening process, so that the drop port can put down a feeder height, heightening height is limited, too high will cause equipment instability.

2.3, short feeding machine: generally used in small and medium-sized high-speed mixers, screw feeder do short to adapt to the height of the mixer drop port, limited storage capacity, such as not timely delivery may lead to feeding machine to accumulate too much material.

In order to better provide you with a professional answer, when sending an inquiry, please describe your parameters or technical requirements (such as processing materials, output size, capacity, etc.), we will reply to you as soon as possible!