20 years focusing on recycling

  • +86-0512-58810860
×
High Speed Friction Washer
High Speed Friction Washer

High Speed Friction Washer High Speed Friction Washer

At the center of Wanrooetech’s high speed friction washer lies a long, fast-spinning shaft with many tilted panels / paddles mounted. Surrounding the rotating shaft is a mesh screen tunnel used for dewatering and filtrating small contaminants such as dirt. A large rectangular case surrounds the entire apparatus where water jets and nozzles are aimed at the mesh screen. The entire machine is set at an incline, around 15 degrees, where the dirty plastic flakes are feed into a vertical feeder located on the lower end. The clean flakes exit through the higher end where it moves onto the drying phase.

Quantity:
Share this:
  • Product Description
  • Video

High Speed Friction Washer Description:
The high-speed friction cleaning machine is an efficient cold cleaning system designed specifically for thoroughly cleaning PET sheets. This system utilizes the principle of friction to effectively clean plastic sheets. Typically, in our standard cleaning production line, after the hot cleaning process, cold water is used to further scrub and remove dirt from the sheets through high-speed friction, demonstrating its excellent cleaning ability.


High Speed Friction Washer Work process:
At the center of WANROOETECH’s high speed friction washer lies a long, fast-spinning shaft with many tilted panels / paddles mounted. Surrounding the rotating shaft is a mesh screen tunnel used for dewatering and filtrating small contaminants such as dirt. A large rectangular case surrounds the entire apparatus where water jets and nozzles are aimed at the mesh screen. The entire machine is set at an incline, around 15 degrees, where the dirty plastic flakes are feed into a vertical feeder located on the lower end. The clean flakes exit through the higher end where it moves onto the drying phase.


The rotating shaft within WANROOETECH’s friction washer spins at nearly 1,000 rotations per minute. As the Plastic flakes enter this machine, the material is mixed at high speeds within the washer where friction between each plastic flake helps scrub off dirt and debris. Water is continuously added via water jets that spray at the mesh screen preventing potential clogging that may occur.

×