20 years focusing on recycling
1.The shredder single shaft for plastic with PVC and HDPE Pipes
2. The rotary and cutting blade with edge of special design, it can get very high efficiency and high capacity.
3. The shredder single shaft for plastic is control by PLC system; the blade can rotate in opposite direction and close automatically if something unexpected happens; with very high safety service.
Plastic Profile Shredder Machine Description:
With the continuous development of the economy, the sales of plastic pipes are also increasing year by year. During the production process, a large number of plastic pipes were discarded. Recycle effectively. To make these pipes a usable resource again, a new type of plastic pipe shredder was used.
The large plastic pipe shredder produced by WANROOETECH Machinery can shred large pipes into small pieces of 5-10 cm by cutting and tearing these waste pipes. To prepare for post-production processing. It is the first step in pipe recycling. The modification of the large pipe shredder is the result of years of painstaking research by WANROOETECH machinery, the introduction of foreign advanced technology, and the research and development and production on the basis of integrating the existing domestic shredder technology. It has a world-class technical level and has domestic characteristics. Various characteristics of the pipe, the production of large pipe shredder suitable for domestic users.
Single Shaft Shredder 'V' shaped blade:
Plastic Profile Shredder Machine Advantages:
1. The shredder single shaft for plastic can shred various bulk materials, basket materials, pipe, plate, sheet, tire, big roll film
2. The frame is combinational structures, made from precision machined extra-thick sheet, slewing axis is forced, Lange-angle, hexagonal prism, the hopper is large-caliber and substantial, so good-sized material is practicable.
3. The revolving knife is designed and processed particularly in thickness, shape.
4. PLC control system, forward and reverse operate and stop automatically can protect the machine when the materials are too big and much. Operate safely, low-speed running, low noise, little dust.
Plastic Profile Shredder Machine Components:
Pusher System Reinforced baseplate can reduce the impact caused by material entering the cutting chamber. A dust collection device is equipped at the bottom of the pusher system to guarantee the long-term stable performance of internal components. | Heat treated rotor knives Special DC53 steel (hardened) four edges use before the replacement |
V-cutting rotor design with staggered cutter positioning | Wear Resistant Tungsten surface coating for abrasive applications |
Control panel Equipped with independent and reliable electrical control panel like SIEMENS PLC control system, DELIXI contactor, SCHNEIDER Electric, etc. Manual & automatic operational modes to choose, quite flexible and safe.Motor overload protection. | Screen Unit Wide range of screens with a variety of configurations and mesh sizes are replaceable based on customers' production requirements. The paper shredder will automatically stop while opening the screen unit to ensure operator safety. The screen is produced and mounted in sections, allow for easy maintenance. |
PLC control Making it easier for fault diagnosis and maintenance. | Hydraulic Station The pressure and rate of flow can be adjusted according to different materials. |
Plastic Profile Shredder Machine Application Areas:
Plastic profile shredders can mainly supply and discharge PVC pipes, chemical pipes, farmland irrigation and drainage pipes, polyethylene pipes for gas, PVC core foam pipes, PVC, PE, double-wall corrugated pipes, aluminum-plastic composite pipes, cross-linked PE pipes, plastic-steel composite pipes, polyethylene silicon core pipes, and underground pipes are shredded.
Model | PNDS-600A | PNDS-800A | PNDS-1000A | PNDS-1200A | PNDS-1500A |
Dimension L*W*H(mm) | 2455×1478×1700 | 2825×1747×1875 | 2825×2004×1875 | 2825×2564×1875 | 2825×2964×1935 |
Cutting Chamber C/D(mm) | 1200×600 | 1410×800 | 1410×1000 | 1410×1200 | 1410×1500 |
Main Power(kw) | 15-22 | 30-45 | 37-55 | 55-90 | 75-132 |
Hydraulic Power(kw) | 2,2 | 3 | 4 | 5.5 | 5.5 |
Shredding Diameter(mm) | 320 | 400 | 400 | 400 | 480 |
Shredding Rotor Length(mm) | 600 | 800 | 1000 | 1200 | 1500 |
Rotating&Fixing Blades QTY(psc) | 32+2×2 | 38+2×2 | 58+2×2 | 95+2×3 | 110+2×3 |
End Plastic Scraps Size(mm) | 30-50 | 30-50 | 30-50 | 30-50 | 30-50 |